Sujata Sterno 3 Burner Gas Stove 3B – 2 mm Stainless Steel, Manual Ignition, 9 Year Warranty

BULLET POINTS

🔩 2 mm Thick Glossy Stainless Steel Body – The Sterno is built on a 2 mm thick glossy stainless steel panel, not the 1.2 mm sheet used in lighter steel cooktops. It resists flexing under heavy brass kadhais and pressure cookers, and wipes clean without the hairline scratching that dulls thin-gauge steel within a year.

🔥 5G Designed Forged Brass Burners – All three burners are forged brass with Sujata's 5G direct-flame design, engineered for Indian-style cooking where the flame needs to hit the base of a heavy vessel rather than spread around it. Forged brass holds its port geometry far longer than pressed alloy, so the flame stays even over years of daily use.

⚙️ SABAF Italian Gas Valve – Every burner runs on a SABAF valve made in Italy — the same valve brand used across premium European hobs. It gives a smooth, progressive knob feel from full flame down to a low simmer, and it is what makes the LPG-to-PNG conversion straightforward.

🔄 Free LPG to PNG Conversion Kit Included – A complimentary set of jets ships in the box, so if your building shifts to piped natural gas you convert the same stove instead of replacing it. No separate purchase, no waiting on a spare part.

🖐 Manual Ignition – Nothing to Fail – This is the manual ignition variant: light it with a lighter or matchstick. There is no battery, no spark module and no igniter wiring, which removes the single most common failure point reported on auto-ignition cooktops.

🍲 Strong & Stable Pan Supports – The pan supports are shaped to hold a wide flat tawa and a round-bottomed handi with equal stability, so a full pressure cooker sits flat without rocking when you lift the lid.

🔁 360° Rotating Brass Gas Nozzle – The brass inlet nozzle rotates a full 360°, so the stove can sit with the cylinder on either side or behind, and the hose runs without a kink whichever way your platform is laid out.

📐 780 × 400 × 70 mm Cooktop Footprint – Measures L 780 × W 400 × H 70 mm, a long, slim three-burner profile that leaves working counter space in front rather than swallowing the whole platform. Measure your platform depth against 400 mm before ordering.

🛡️ ISI Marked to IS 4246 – Certified to IS 4246 under BIS licence CM/L 8530070478 — the Indian safety standard for LPG domestic gas stoves, covering burner performance, valve integrity and construction.

📦 What's in the Box – 1 × Sujata Sterno SSCT 3B ST 81 three-burner stainless steel gas stove · 3 × forged brass burners with pan supports · 1 × complimentary LPG-to-PNG conversion jet set · user manual and warranty card. Warranty: 9 years on the complete product (only service visit charges payable after the first 2 years). Country of origin: see carton declaration.

PRODUCT DESCRIPTION

(Everything from the H2 below is the Shopify description body. This heading itself is a file label — do not paste it.)

The stove that outlives the kitchen it was bought for

You know the sound a thin gas stove makes when you set down a full cooker — that hollow flex, the slight rock, the moment you steady it with one hand while your other hand is still holding the lid. Six months in, the top has faint scratch haloes around each burner and one knob has started to feel gritty. The Sujata Sterno is built at the opposite end of that problem: a 2 mm glossy stainless steel body, forged brass burners, and an Italian SABAF valve on every knob. It is a plain, unfussy, heavy stove designed to be boring for nine years.

At a Glance

• Model: Sujata Sterno SSCT 3B ST 81
• Burners: 3 forged brass, 5G direct-flame design
• Body: 2 mm thick glossy stainless steel
• Dimensions: L 780 × W 400 × H 70 mm
• Ignition: Manual
• Gas valve: SABAF (Italy)
• Fuel: LPG, convertible to PNG — jet set included
• Certification: ISI marked, IS 4246, CM/L 8530070478
• Warranty: 9 years on complete product

Why is the 2 mm steel body the specification that matters most?

The Sterno uses a 2 mm thick glossy stainless steel panel, and on a gas stove that single number predicts most of what you will feel over the next decade. Thin cooktops in the 0.8–1.2 mm range flex measurably when a loaded vessel is placed off-centre, and that repeated flexing is what eventually loosens burner seatings and makes knobs feel sloppy. At 2 mm, the panel simply does not move.

The practical difference shows up in ordinary moments. A 5-litre pressure cooker full of chana sits dead flat. You can rest a heavy iron tawa half-on, half-off a burner while you turn rotis without the whole top tilting. And glossy stainless steel takes a spill of boiled-over milk or a splash of sambar without staining — a damp cloth while the surface is still warm, and it is gone. Matt finishes hide fingerprints better; glossy finishes clean better and stay looking new longer, which is the trade Sujata has made here.

What does a 5G forged brass burner actually do differently?

Forged brass burners hold their flame-port geometry over years of thermal cycling, and the 5G direct-flame design aims the flame inward at the base of the vessel rather than letting it spread outward around the sides. For Indian cooking this is the difference between heat that works and heat that escapes.

You notice it most on the things that need real power. A kadhai of onions for biryani masala browns evenly across the base instead of scorching in a ring. Milk for kheer comes to a boil without the flame licking up the sides of the pot and baking a crust onto the outside. When you drop to a low flame for a slow dal or a pot of kadha, the SABAF valve lets you set a genuinely low simmer that stays lit rather than guttering out — cheap valves tend to have a narrow usable band near the bottom of their travel, and this one does not.

Will this stove work if my building shifts to piped gas?

Yes. The Sterno ships with a complimentary set of conversion jets in the box, and the SABAF valve is designed for easy LPG-to-PNG conversion. When your society switches over to piped natural gas, a service technician swaps the jets and the same stove carries on.

This matters more than it used to. PNG connections are expanding through apartment complexes across Indian cities, and a stove bought today has a fair chance of seeing that changeover during its life. Cooktops without a conversion path get replaced. This one gets a ten-minute service visit. Keep the jet packet with your warranty card — it is small and easy to lose in the first month, and it is the part you will want years later.

Why choose manual ignition over auto-ignition?

Manual ignition removes the most failure-prone component on a modern gas stove. There is no battery to replace, no spark module to corrode in a humid kitchen, and no igniter wiring to fray. You light the burner with a lighter or a matchstick, exactly as you always have.

Auto-ignition is a genuine convenience, and plenty of households prefer it. But it is also the part that customers most often report failing first, and once the spark module goes the stove still cooks — you are simply back to a lighter, having paid for the feature. If you want a cooktop whose nine-year warranty is spent on the parts that actually cook, the manual variant is the honest choice. Sujata does offer the Sterno with auto-ignition if you would rather have it.

Will 780 × 400 mm fit my kitchen platform?

The Sterno 3B measures L 780 × W 400 × H 70 mm — long and slim rather than square. Measure your platform depth first: at 400 mm deep it leaves usable counter in front of the stove on a standard 600 mm platform, which is where most people keep the masala dabba and the chopping board.

The length is the thing to check. At 780 mm this is a wide three-burner, and it wants a clear run of platform. It suits a straight kitchen run or the long leg of an L-shaped platform. In a tight corner, or if your platform is under 750 mm of clear width, look at the 2-burner Sterno instead. The 70 mm height is standard countertop and clears a regular backsplash without trouble.

How do I keep the steel looking new?

Wipe the top while it is still warm — not hot — with a damp cloth and a mild dishwashing liquid, then dry it. Warm steel releases oil and spilled food readily; cold steel makes you scrub, and scrubbing is what puts fine scratches into a glossy finish.

Lift the burners and pan supports out weekly and wash them separately. The single most common cause of an uneven or yellow-tipped flame is a blocked burner port, usually from dal or milk that boiled over and dried in place — a soft brush and warm water clears it. Keep steel wool, scouring powder and any abrasive cream away from the panel entirely. And once a month, run your eye over the gas hose for cracking or hardening; hoses are the one part of the setup that ages on their own schedule regardless of the stove.

Frequently Asked Questions

Does the Sujata Sterno 3 burner work on PNG? Yes, after conversion. It runs on LPG as supplied, and a complimentary set of PNG conversion jets is included in the box. A service technician swaps the jets to convert it. Do not attempt to run it on piped gas without changing the jets.

Is this stove auto-ignition or manual? This is the manual ignition variant of the Sterno — you light it with a lighter or matchstick. There is no battery and no spark module. Sujata offers the same SSCT 3B ST 81 body with auto-ignition as a separate option if you prefer that.

What is the warranty on a Sujata Sterno gas stove? 9 years on the complete product. Service visit charges are payable after the first 2 years; the warranty coverage itself continues for the full nine.

Is it ISI certified? Yes. It is ISI marked to IS 4246 — the Indian standard for LPG domestic gas stoves — under BIS licence number CM/L 8530070478.

Are the burners brass or alloy? Forged brass, on all three burners, in Sujata's 5G direct-flame design. Forged brass holds its port shape and flame pattern far longer than pressed or alloy burners.

How thick is the steel? 2 mm, in a glossy stainless steel finish. This is the heavier gauge in Sujata's steel range — the Majestic series uses 1.2 mm by comparison.

What size platform do I need? The stove is 780 mm wide and 400 mm deep. Allow a clear run of at least 800 mm of platform width, and check that your platform is at least 400 mm deep with room to spare in front.

Can I put a heavy pressure cooker or a big kadhai on it? Yes. The 2 mm body and the strong pan supports are built for exactly that. A full 5-litre cooker or a large brass kadhai sits stable without rocking.